CRAKGON® Surface Repair
If you have a residential or DIY surface repair project you need CRAKGON®. Paint it on and the cracks are gone!
What is it?
CRAKGON® is a world-class product. It has been specifically designed and developed as a paint reinforcer to permanently repair surface damage both internally and externally. Most importantly it’s easy to apply, you simply paint it on and the cracks are gone.
What do you use it for?
CRAKGON® is a problem solver product. Used to repair damaged surfaces it protects the wall and paint system against UV and weathering effects. It also strengthens the wall coating and dimensional stability to paint film. CRAKGON® has been successfully used to eliminate and/or prevent the most common interior and exterior surface problems including:
- Any surface cracks, alligatoring and checking
- Rising Damp, Mould and Mildew
- Cement rendered walls and fences
- Blistering paint EG: Flaking fascia boards
- Cracked lathe and plaster walls and ceilings
- Sagging or Running
- Rust Discolouration
- Peeling paint due to poor adhesion, interior or exterior moisture.
We applied CRAKGON® to repair a badly damaged plaster wall 8 years ago, we returned to do other work on the site recently and found that the repaired wall was in perfect condition but the walls surrounding the repair site were now covered in cracks. Bob De Groot Master Painter
Explore our CRAKGON® image galleries now or scroll down to read more about how this amazing product works.
How does it work?
CRAKGON® works with non-woven paint reinforcing tissue of randomly dispersed continuous C-glass fibers. The glass fibers function like the “steel-rod grid in concrete structures”, enhancing the durability and, thus preventing cracking of the reinforced paint system. A single layer of CRAKGON®® and paint offer an impermeable, highly abrasion resistant, hygienic and long lasting protection barrier. Which, most importantly allows the wall to breathe.
CRAKGON® REINFORCED PAINT JOB
COMMON PROBLEMS IN NON- REINFORCED PAINT JOB
The CRAKGON® system is permanent. Chalking is limited only where it reaches the CRAKGON® Membrane.
U.V. rays decompose the paint-film.
CRAKGON® repels dust. Erosion is limited to the outer layers since each fiber is encapsulated in paint. Once the fibre surface is exposed, the color is still reflected by the fibers.
The paint-film gets eroded over time by the continuous action of the wind, rain, and dust particles.
Avoided by the specific resin-rich reinforcement fibres found in CRAKGON®.
Over time, small cracks develop throughout the surface of the paint-film.
The paint-film maintains its plasticity through micro sub-superficial capsules within the fibre, which reinforce the paint-film the same way steel-rods do in reinforced concrete, enhancing durability and preventing cracking.
The paint-film loses its elasticity, and begins to peel-off as it breaks away from the substrate.
Loved by Master painters, but you don’t have to be one to use it.
CRAKGON® is such a premium product that one master painter offers a 10 year guarantee.
We are so impressed with the CRAKGON® product we use to reinforce walls we offer our clients a written 10 year guarantee when it is applied. Bob De Groot Paint Services
Laboratory tested to last in your home
Laboratory tests prove CRAKGON® prevents the reappearance of surface cracks over 10 years. Longitudinal tests conducted by the National Building Research Institute of the Council for Scientific & Industrial Research (PRETORIA, South Africa) indicate CRACKGON delivers outstanding results over a 10-year timeframe.
Plaster exposed for 10 years with CRAKGON® reinforced paint system
Plaster exposed for 10 years without a reinforced paint system
Here are a couple of the conclusions made after ten years exposure of paint systems with and without CRAKGON®® reinforcing on a plastered wall displaying severe shrinkage cracking:
- In all the systems used, the finishes that incorporated CRAKGON® have proved superior to those that did not.
- While the incorporation of CRAKGON® in a coating system results in more paint being required, the effect is that the system remains satisfactory for a longer period.
Division of Building Technology – CSIR
CRAKGON® is safe and simple to use in five easy steps
Prepare the surface on which to apply CRAKGON®, filling major cracks. removing loose or flaking paint and smoothing down.
Surface must be clean, dry and free of dust. Apply horizontal strip of paint at top of surface from which to hang CRAKGON®.
Stick CRAKGON® to wet, painted strip. Ensure that drop is vertical and even. Smooth CRAKGON® against dry surface.
Apply a generous coat of paint through CRAKGON®. This will stick CRAKGON® to the wall. Repeat steps 2 to 4. For best results do not overlap succeeding drops.
After first coat has dried, the fibre pattern of CRAKGON® will be visible. Apply a final coat of paint, which may be of a different quality or another colour if desired.
This video demonstrates how easy it is to apply CRAKGON®
It’s healthy too
CRAKGON® is not hazardous to health. CRAKGON® is made from continuous monofilament glass fibres exceeding 6 micro metres in diameter, which cannot be inhaled by humans. When handling CRAKGON® no protective clothing is necessary. However, persons with very sensitive skin may experience slight temporary irritation. Should this occur, washing with soap and cold water provides a simple remedy.
Why CRAKGON® is perfect for Residential and DIY
- Simple to apply – paint it on and the cracks are gone;
- Paint in combination with CRAKGON® will repair building surfaces like nothing else can. Ensuring the job is only done once;
- Banish hairline plaster cracks, rising damp, mould and mildew forever;
- Significantly extend the life of the paint film;
- Protects against UV and weathering effects;
- Strengthens coating and dimensional stability to paint film.
If you’re serious about paint you must be serious about surface repair.
Click here to read our CRAKGON® case studies. See the product as it saves the local fishing fleet, tackles oil tank farms, rescues a Portugese hotel owner, battles with a disintegrating fascia board, wins and survives for at least another 12years and so much more.
CRAKGON® – Paint it on and the cracks are gone!
- Understanding humidity and its causes;
- Common Solutions to Humidity related problems and why they fail;
- Fibreglass paint reinforcement solutions and why CRAKGON is a permanent solution